Loader is an important mechanical equipment in engineering construction. Every part of it is crucial. In particular, the loader drive axle, not only carries the weight and traction of the entire loader, but also the key transmitter of power and braking force. Therefore, understanding and properly dealing with the common faults of the drive axle is essential to ensure the stable and efficient operation of the loader.
1. The drive axle oil leakage problem
In the daily operation of loaders, oil leakage is often a headache. The transaxle oil leakage is one of the common problems. This is usually due to wear, damage, or improper installation of the oil seal. To solve this problem, we need to replace damaged oil seals on time and ensure that they are installed correctly. At the same time, it is also necessary to check whether the sealing surface around the oil seal has scratches or dents. If there is a problem, it should be repaired or replaced in time.
2. The trouble of abnormal noise
Another disturbing problem is the abnormal noise the drive axle makes during operation. This noise is usually caused by poor gearing, damaged bearings or insufficient lubrication. In order to eliminate this noise, we need to adjust the gear clearance, replace the damaged bearings, and ensure that the lubricating oil is sufficient and suitable. In addition, it is necessary to check the wear of the gear regularly and replace it in time if necessary.
3. The challenge of high temperature
The high temperature of the drive axle is also a problem that cannot be ignored. This can be due to poor lubricating oil quality, insufficient oil, or cooling system failure. In order to reduce the temperature of the transaxle, we need to replace the qualified lubricating oil, replenish the adequate amount of oil, and clean the cooling system to keep it unimpeded. At the same time, it is also necessary to pay attention to check whether the drive axle has abnormal conditions such as overload, speeding or excessive braking, and deal with it in time.
4. The importance of maintenance
In addition to timely handling of faults, doing a good job of maintenance is also the key to ensuring the stable operation of the loader drive axle. We should regularly check the amount of lubricating oil, quality and temperature of the drive axle, and replace it according to the use and the specified period. At the same time, it is also necessary to check the wear of various parts, such as gears, bearings, oil seals, etc., if abnormal or damaged, it should be replaced or repaired in time. In addition, keeping the cooling system clean and unblocked is also an important part of maintenance work.
In short, the loader drive axle is the core part of the loader, its health is directly related to the overall operating efficiency of the loader. Therefore, we need to understand and properly deal with its common faults, and do a good job of maintenance to ensure the stable and efficient operation of the loader.
2021-06-27
2021-09-30
2021-01-13
2021-12-31
2021-01-14
2021-08-10
2021-12-14
2021-01-15